Kia Sorento: Adjustment - Horn - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Adjustment

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Horn / Adjustment

1.
Operate the horn, and adjust the tone to a suitable level by turning the adjusting screw.
  
Horn adjustment screw is automatically sealed with silicon sealant.
The shape and size of the applied sealant is variable and tails or dribbles are acceptable and not to be tampered with.

Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspec ...

AVN System
...

See also:

Components Location
1. Front axle 2. Front lower arm 3. Drive shaft 4. Sub frame 5. Stabilizer bar 6. Steering gearbox 7. Stabilizer link 8. Front strut assembly ...

Brake Pedal Adjustment
Brake Pedal Height and Free Play 1. Disconnect the stop lamp switch connector (A) and loosen the stop lamp switch lock nut. 2. ...

Installation
   • Install the component with the specified torques. • ...

Copyright © www.ksmanual.com 2014-2024