Kia Sorento: Specifications
ON/OFF Solenoid Valve(SS-A)
▷ Control type : Normal low type
| Control pressure kpa (kgf/cm², psi) |
490.33 (5.0, 71.12) |
| Internal resistance(Ω) |
10 ~ 11 |
SS-A Solenoid Valve(ON/OFF)
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.
...
Circuit Diagram
...
See also:
For best battery service
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or terminal grease.
Rinse any spill ...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis
ground using the backside of ECM harness connector as ECM side check
point. If the problem is fo ...
Water Temperature Control Assembly Removal
1.
Disconnect the battery negative terminal.
2.
Loosen the drain plug and drain the engine coolant.
3.
Remove ...
Copyright В© www.ksmanual.com 2014-2024