Kia Sorento: Positive Crankcase Ventilation (PCV) Valve Installation - Crankcase Emission Control System - Emission Control System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Positive Crankcase Ventilation (PCV) Valve Installation

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Installation

1.
Install in the reverse order of removal.

PCV Valve installation:
1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.    ...

Evaporative Emission Control System
...

See also:

Auto Light Sensor Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw ( ...

Checking the brake/clutch fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* fl ...

Seat warmer (if equipped)
The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passeng ...

Copyright www.ksmanual.com 2014-2025