1. |
Remove the alternator cover (A) using a screw driver after loosening
the nuts (B).
|
2. |
Remove the slip ring guide (A) and then loosen the mounting bolts
and disconnect the brush holder assembly (B).
|
3. |
Remove the pulley (A) using the SST (09373-27000) (B).
|
4. |
Loosen the 4 through bolts (A).
|
5. |
Disconnect the rotor (A) and cover (B).
|
6. |
Reassembly is the reverse order of disassembly.
|
Quarter Fixed Glass Installation
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
...
Fuel Pressure Control Valve
Fuel Pressure Control Valve is installed on the high pressure fuel pump
and controls fuel flow flowing into the injectors in accordance with the ECM
signal calculated based on various engine ...
Oil Cooler Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
2.
Disconnect the oil cooler coo ...