1. |
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
|
2. |
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes then check the oil
level. Oil level should be between the "L" and "F" marks on the dipstick.
If low check for leakage and add oil up to the "F" mark.
|
Selection Of Engine Oil
For best performance and maximum protection of all types of operation,
select only those lubricants which :
|
Thermostat Removal and Installation
Removal of the thermostat would have an adverse effect, causing a lowering
of cooling efficiency. Do not remove the ther ...
Heater Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
3.
...
Front Wheel Transfer Assembly Installation
1.
Install in the reverse order of removal.
1.
...