Kia Sorento: Vehicle Auto Shut-off system - Driving your vehicleKia Sorento: Vehicle Auto Shut-off system

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Driving your vehicle / Vehicle Auto Shut-off system

The Vehicle Auto Shut-off system designed for your Kia Sorento powers down the ignition automatically after a predetermined duration set by the driver, conserving fuel and mitigating the risk of carbon monoxide accumulation.

Kia Sorento instrument cluster display showing Vehicle Auto Shut-off countdown notification

(A) Vehicle will be turned off automatically in:

Activation requirements

The Vehicle Auto Shut-off system engages automatically when all specified operational parameters are met simultaneously:

TIP

  • The factory default countdown duration for the system is set to 60 minutes.

Resetting the time

You can easily reset and extend the active countdown timer of the Vehicle Auto Shut-off system by performing any of the following actions:

Canceling the Vehicle Auto Shut-off system

The Vehicle Auto Shut-off sequence cancels immediately if any of the following vehicle changes occur:

Brake Assistant System (BAS). Good braking practices
Brake Assistant System (BAS) The Brake Assistant System integrated into your Kia Sorento delivers crucial supplemental hydraulic pressure whenever you apply a sudden, forceful input to the brake ...
Idle Stop and Go (ISG) system
The Idle Stop and Go system helps optimize urban fuel efficiency by automatically shutting down the engine of your Kia Sorento whenever the vehicle comes to a complete halt during traffic congest...
See also:

Kia Sorento Immobilizer System
The integrated immobilizer system protects your Kia Sorento against unauthorized access and vehicle theft. If an improperly coded key, unauthorized mechanical duplicate, or non-recognized transpo ...

Filler-Neck Assembly Installation
1. Install in the reverse order of removal. Filler-neck assembly bracket installation nut : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ ...

Front Oil Seal Removal and Installation
1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pullty") 2. Remove the front oil seal(A). ...

Copyright © www.ksmanual.com 2014-2026 - 0.037