Kia Sorento: Windshield defrosting and defogging
Accumulated frost, ice, or condensation on the windshield severely compromises forward visibility and must be cleared promptly to ensure safe driving conditions in your Kia Sorento.
WARNING: Windshield heating safety guidelines
Do not activate the
or
setting while running the air
conditioning in extremely high humidity conditions. The sharp temperature differential between the chilled exterior
airflow and the glass surface can cause moisture to condense on the outer surface of the windshield, instantly
obscuring your vision. In such humid weather, switch the airflow mode to
and set the fan speed
to
its lowest level.
To achieve maximum defrosting performance during freezing weather, set the temperature control to maximum heat and adjust the fan speed to its highest setting in your Kia Sorento.
Select the floor-defrost climate mode if you prefer maintaining a warm airflow directed toward the footwells while simultaneously clearing the upper glass surfaces.
Always clear accumulated snow, ice, and debris completely from the windshield, rear window, sideview mirrors, and all side glass before operating your vehicle on public roads.
To optimize heater and defroster efficiency and minimize internal window fogging, keep the vehicle hood and the fresh air intake grilles completely clear of snow, ice, and leaves.
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Smart Key Diagnostic Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the GDS. GDS operates
actuator quickly to monitor, input/output value and self diagnosis.
The following thr ...
Radiator Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and then
install it on a pressure tester.
2.
Ap ...