1. |
Install the mirror making sure the mounting bracket not to be
damaged.
|
2. |
Install the mirror wiring cover after reconnecting the connector
and tightening the screw.
|
Parking Assist Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Brake Booster Installation
1.
Installation is the reverse of removal.
•
...