Kia Sorento: Anti-Pinch Strip Installation

Anti-Pinch Strip Removal

1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate side trim (A). (R ...

PTG Spindle Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim and Luggage side trim. (Refer to the Body - "Tailgate& ...

See also:

Positive Crankcase Ventilation (PCV) Valve Installation
1. Install in the reverse order of removal. PCV Valve installation: 1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft) ...

Rear Cross Member Replacement
1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance ...