Kia Sorento: Air Ventilation Seat Inspection - Seat Electrical - Body Electrical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Air Ventilation Seat Inspection

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Inspection

1.
Attach the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3.
Check that the fan motor operates.

Pin
Description
1
12V
2
RPM control
3
GND

2.
If the fan motor fails to operate, replace it.
Air Ventilation Seat Installation
1. Install the blower fan. 2. Install the seat back and cushion. ...

Air Ventilation Seat Control Unit Component Location
...

See also:

Battery Cleaning
1. Make sure the ignition switch and all accessories are in the OFF position. 2. Disconnect the battery cables (negative first). ...

Specification
HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.5 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) ...

Rear Wiper Motor Removal
1. Detach the rear wiper cap (A). 2. Remove the rear wiper arm & blade (A) after removing rear wiper HEX nut (B). ...

Copyright www.ksmanual.com 2014-2025