Kia Sorento: Air Ventilation Seat Installation - Seat Electrical - Body Electrical System - Kia Sorento XM 2011-2022 Service ManualKia Sorento: Air Ventilation Seat Installation

Second Generation XM (2011-2022) / Kia Sorento XM 2011-2022 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Installation

1.
Install the blower fan.
2.
Install the seat back and cushion.
Air Ventilation Seat Removal
1. Remove the seat back cover (A). (Refer to Body - "Front seat") 2. Remove the blower fan (A) after removing the scr ...

Air Ventilation Seat Inspection
1. Attach the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3. Check that the fan motor operates. ...

See also:

Compressor Installation
1. Make sure the compressor mounting bolt with the correct length is screwed in. Tighten the mounting bolts with the specified tightening order. ...

Anti-Pinch Strip Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate side trim (A). (R ...

Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Copyright © www.ksmanual.com 2014-2022