1. |
The IPM can be diagnosed by using the GDS. The BCM communicates
with the GDS which then displays inputs and outputs along with codes.
|
2. |
To diagnose the IPM function, select the vehicle model and IPM.
|
3. |
To consult the present input/out value of IPM, "Current DATA".
It provides information of IPM input/output conditions of power supply,
turn signal/brake lamp, headlamp, door locks, outside mirror, wiper,
auto-light and transmitters etc.
|
4. |
To perform functional test on IPM outputs, select "Actuation Test"
|
5. |
To change the "user option" on BCM, select the "User Option" menu
and change the value as below.
|
Installation
•
Install the component with the specified torques.
•
...
Power Mosfet (DATC) Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower
resistor must be rep ...
Front Disc Brake Replacement
Front brake pads
1.
Loosen the guide rod bolt (B) and then remove caliper body (A).
2.
Replace pad shim (D), pad retainers (C) and b ...