Kia Sorento: Console Components
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body (Interior and Exterior) / Exterior / Console Components
| [M/T] |
| 1. Floor console assembly 2. Console upper cover 3. Console side cover [LH] |
4. Console side cover [RH] 5. Rear console cover 6. Floor console mounting bracket |
| [A/T] |
| 1. Floor console assembly 2. Console upper cover 3. Console side cover [LH] |
4. Console side cover [RH] 5. Rear console cover 6. Floor console mounting bracket |
Cowl Top Cover Replacement
1.
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ ...
Console Replacement
Floor Console Assembly Replacement
•
Pry the trim off using a plastic trim tool and apply ...
See also:
Cylinder Head Cover Installation
1.
Install cylinder head cover.
(1)
The hardened liquid gasket sealant located on the upper area
between timing chain cover and cyli ...
Blind Spot Detection Unit Inspection
BSD Unit Alignment
To sense the cars exactly in the next lane with the radar, the direction
of the sensor and the direction of the vehicle have to align.
This is BSD unit alignm ...
Removal
1.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Remove the battery and the battery tray.
...
Copyright В© www.ksmanual.com 2014-2024