Kia Sorento: 28 Brake Control Solenoid Valve (28/B_VFS) On Vehicle Inspection

Inspection

The automatic transaxle system can be more quickly diagnosed for problems by using the vehicle diagnostic system (KDS). (Refer to "DTC guide")

(1)	Self Diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS (Refer to DTC guide when fault code is found)

(2)	Data Analysis : Checking the system input/output data state (Data Analysis → System Selection → 28 Brake Control Solenoid Valve)

(3)	Actuation Test : Checking the system operation condition (Data Analysis → System Selection → Actuation Test → 28 Brake Control Solenoid Valve)

Component Inspection

1.	Turn the IG "OFF".

2.	Disconnect the battery negative ( - ) terminal.

3.	Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")

4.	Disconnect the main connector (A).

Measure the resistance between power terminal (14) and signal terminal (23).

Specification : 5.0 - 5.6 Ω

Automatic Transaxle System — Hydraulic System / 28 Brake Control Solenoid Valve (28/B_VFS) / On Vehicle Inspection / Inspection illustration

Description • 28 Brake control solenoid valve is a Variable Force Solenoid (VFS) type. ...

Removal ...

Manuals list