Kia Sorento: 12 V Lithium Auxiliary Battery Removal and Installation
Kia Sorento (MQ4, 2021-2026) Service Manual / Body Electrical System / Charging System / 12 V Lithium Auxiliary Battery Removal and Installation
| Removal |
| 1. |
Remove the front seat assembly. [Passenger's side]
(Refer to Body - "Front Seat Assembly")
|
| 2. |
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly")
|
| 3. |
Remove the cowl side trim. [Passenger's side].
(Refer to Body - "Cowl Side Trim")
|
| 4. |
Remove the center pillar lower trim. [Passenger's side]
(Refer to Body - "Center Pillar Trim")
|
| 5. |
Separate the passenger's side floor carpet assembly (A).
|
| 6. |
Disconnect the connectors (A).
|
| 7. |
Remove the 12V lithium auxiliary battery (A) after removing the nuts.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Description and Operation Principle
•
The P-LBM (Parking Lithium Battery Module) is an additional 12 V auxiliary battery, separate f...
12 V Lithium Auxiliary Battery Description and Operation
Circuit Diagram
[Floor Console Tray / Rear Console Cover]
[Front Seat Back Board]
[Luggage Side Trim]...
USB Charger Circuit Diagram
See also:
Timing Chain Cover Removal
...
Reservoir Tank Removal and Installation
1.
Remove the over flow hose(A).
2.
Remove the reservoir tank(B) after loosening the bolts.
Tightening torque:
...
License Lamps Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens (A) from the panel after loosening
a screw.
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0526