Kia Sorento: Wipers & Washers
A : Wiper speed control (front)
MIST/ 
– Single wipe
OFF / O – Off
INT / --- – Intermittent wipe
AUTO – Auto control wipe
LO / 1 – Low wiper speed
HI / 2 – High wiper speed
B : Intermittent control wipe time adjustment
C :Wash with brief wipes (front)
D : Rear wiper/washer control
ON / 
– Continuous wipe
INT / --- – Intermittent wipe
OFF / O – Off
E :Wash with brief wipes (rear)
Battery saver function
The purpose of this feature is to prevent the battery from being discharged
if the lights are left in the ON position. The system automatically shuts off
the parking lights 30 seconds after the ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST/ :
For a single wiping cycle, move the lever to this (MIST/ ) position andrelease
it. The wipers will operate continuously if the l ...
See also:
Heater & A/C Control Unit (DATC) Component
Connector Pin Function
Connector
Pin No
Function
Connector
Pin No
Function
A
1
Battery (+)
A
29
...
Fuel Sender Installation
1.
Install in the reverse order of removal.
...
Component Location
1. Auto light sensor
2. Head lamps
3. Lighting switch (Auto)
4. Tail lamps
5. IPM (Intelligent intergrated Platform Module)
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
