Kia Sorento: Troubleshooting
Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Driveshaft and axle / Troubleshooting
| Trouble Symptom |
Probable cause |
Remedy |
| Vehicle pulls to one side |
Scoring of driveshaft ball joint |
Replace |
| Wear, rattle or scoring of wheel bearing |
Replace |
|
| Defective front suspension and steering |
Adjustment or Replace |
|
| Vibration |
Wear, damage or bending of driveshaft |
Replace |
| Driveshaft rattle and hub serration |
Replace |
|
| Wear, rattle or scratching of wheel bearing |
Replace |
|
| Shimmy |
Defective wheel balance |
Adjustment or Replace |
| Defective front suspension and steering |
Adjustment or Replace |
|
| Excessive noise |
Wear, damage or bending of driveshaft |
Replace |
| Rattle of driveshaft and worn hub splines |
Replace |
|
| Wear, rattle or scoring of wheel bearing |
Replace |
|
| Loose hub nut |
Adjustment or Replace |
|
| Defective front suspension and steering |
Adjustment or Replace |
Special Service Tools
Tool(Number and Name)
Illustration
Use
09495-3K000
Band installer
Installation of ear type boot band
09568-4A000
Ball joint ...
See also:
Yaw-rate and G Sensor Installation
1.
Remove the ignition key from the vehicle.
2.
Install inthe reverse order of removal.
3.
After installing the ...
Parking Assist Sensor Installation
1.
Install the rear ultra sensor after connecting the connector.
2.
Install the rear bumper cover.
3.
Connect t ...
Engine And Transmission Assembly Removal
•
Use fender covers to avoid damaging painted surfaces.
•
...
Copyright © www.ksmanual.com 2014-2020