Kia Sorento: Transaxle Oil Temperature Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Transaxle Oil Temperature Sensor Specifications

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Specifications

▷ Type: Negative Thermal Coefficient Type(NTC)
Temp.(°C)°F
Resistance (kΩ)
(-40)-40
48.1
(-20)-4.0
15.6
(0)32.0
5.88
(20)68.0
2.51
(40)104.0
1.11
(60)140.0
0.61
(80)176.0
0.32
(100)212.0
0.18
(120)248.0
0.10
(140)284.0
0.06
(165)329.0
0.03

Transaxle Oil Temperature Sensor Description
Transaxle Oil Temperature Sensor(OTS) monitors the automatic transaxle fluid's temperature and conveys the readings to TCM. It is an Negativen Thermal Coefficient(NTC) sensor whose resist ...

Transaxle Oil Temperature Sensor Circuit Diagram
...

See also:

Windshield Deicer Switch Installation
1. Install the heater control unit. 2. Install the center fascia panel. ...

In-car Sensor Inspection
1. Turn the ignition switch ON. 2. Blow air with changing temperature into the in-car sensor air inlet. Measure the sensor resistance betwe ...

Fuel Filler Door Open Switch Inspection
1. Remove the front door trim panel. (Refer to Body - "Front door") 2. Disconnect the switch connector (A) from wiring. ...

Copyright © www.ksmanual.com 2014-2019