Kia Sorento: Specifications - 26 Brake Control Solenoid Valve(26/B_VFS) - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Specifications

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) / Specifications

Direct control VFS[26/B]
▷ Control type : Normal low type
Control Pressure kpa
(kgf/cm², psi)
0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23)
Current value(mA)
0 ~ 850
Internal resistance(Ω)
5.1 ± 0.3

26 Brake Control Solenoid Valve(26/B_VFS)
26Brake control solenoid valve(26/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake. ...

Circuit Diagram
...

See also:

Fuel Tank Air Filter Installation
Х Install the component with the specified torques. Х Note that internal damage may occur when the component is dropped. In this case, use i ...

Rear Stabilizer Bar Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Tail Gate Adjustment
1. After loosening the tailgate hinge (A) mounting bolt, adjust the tailgate by moving it up or down, or right or left. 2. Adjust the tailg ...

Copyright © www.ksmanual.com 2014-2019