Kia Sorento: Side Airbag (SAB) Module Removal - Airbag Module - Restraint - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Side Airbag (SAB) Module Removal

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Removal

  
The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag.
1.
Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.
2.
Remove the front seat assembly. (Refer to the Body group- Seat)
3.
Remove the seat back assembly. (Refer to the Body group- Seat)
Side Airbag (SAB) Module Components
...

Side Airbag (SAB) Module Installation
   Be sure to install the harness wires not to be pinched or interfered with other parts. ...

See also:

Circuit Diagram
...

Rear Stabilizer Bar Inspection
1. Check the rear stabilizer bar for deformation. 2. Check the rear stabilizer link ball joint for damage. ...

Anti-Pinch Strip Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate side trim (A). (R ...

Copyright © www.ksmanual.com 2014-2019