Kia Sorento: Purge Control Solenoid Valve (PCSV)

Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold. This valve is normally closed when no voltage is applied.

Replacement

The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...

Specification

Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] ...

See also:

Spark Plug Removal
1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Direct Electro Hydraulic Actuator Coupling Installation
1. Install in the reverse order of removal.    • ...

Rear Driveshaft Reassembly
1. Wrap tape around the driveshaft splines (TJ side ) to prevent damage to the boots. 2. Apply grease to the driveshaft and install the boo ...