Kia Sorento: Power Seat Control Switch Removal
Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Body Electrical System / Seat Electrical / Power Seat Control Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the power seat control switch (A).
(Refer to Body - "Front seat")
|
Power Seat Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Power Seat Control Switch Installation
1.
Install the power seat control switch after connecting the connector.
...
See also:
Components Location
Supplemental Restraint System Control
Module (SRSCM)
Driver Airbag (DAB) / Passenger Airbag
(PAB)
Side Airbag (SAB)
Curtain Airbag (CA ...
Radiator Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and then
install it on a pressure tester.
2.
Ap ...
Ignition Coil Installation
1.
Install in the reverse order of removal.
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)
...
Copyright © www.ksmanual.com 2014-2020