Kia Sorento: Power Door Mirror Switch Circuit Diagram

Component Location

1. Power door mirror 2. Power door mirror 3. Power folding mirror switch ...

Power Door Mirror Switch Removal

Driver Door Mirror Switch 1. Disconnect the negative battery terminal. 2. Remove the front door trim. (Refer to Body - "Front d ...

See also:

Heater & A/C Control Unit (Manual) Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia panel (A). ...

Rear Coil Spring Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Blind Spot Detection Unit Installation
1. Install the BSD units to the rear bumper. 2. Install the rear bumper. 3. Connect the negative (-) battery te ...