Kia Sorento: Output Speed Sensor Description - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2021 Service ManualKia Sorento: Output Speed Sensor Description

Second Generation XM (2011-2021) / Kia Sorento XM 2011-2021 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Description

The output speed sensor (A) is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the Transaxle Control Module(TCM). The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Input Speed Sensor Installation
1. Install in the reverse order of removal.    • ...

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.45~1.9) 0.0571~0.0748 Output voltage (V) ...

See also:

Telemetics Unit (TMU) Inspection
1. After replacing the TMU unit, access Dealer Engineering Mode in head unit. (Refer to MTS system - "TMU Dealer Engineering Mode") 2 ...

Power Door Mirror Switch Inspection
1. Remove the front door trim and power door mirror switch module (A). (Refer to Body - "Front door") 2. Check fo ...

Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Copyright © www.ksmanual.com 2014-2021