Kia Sorento: IPM Specifications
Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Body Electrical System / BCM (Body Control Module) / IPM Specifications
| Items |
Specifications |
| Rated voltage |
DC 12V |
| Operating voltage |
DC 9 ~ 16V |
| Operating temperature |
-30°C ~ 75°C (-4°F ~ 158°F) |
| Insulation resistance |
RKE specificaiton : 5.5 mA Smart key specificaiton : 3.0 mA LIN communication specificaiton : 3.3 mA |
※ Abbreviation
IPM : Intelligent intergrated Platform Module
DDM : Driver Door Module
ADM : Assist Door Module
IMS : Intergrated Memory System
SMK : Smart Key
IPM Components
Outer Connector (L / M / N / K)
Connector
Pin No.
Description
Active
Remark
K
1
IMS LIN
...
See also:
Seat Belt Pretensioner (BPT) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Rear Hub - Carrier Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the rear axle carrier for cracks.
...
Copyright © www.ksmanual.com 2014-2020