Kia Sorento: IMS module Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS module Installation

1.	Install the IMS module after reconnecting the connector.

2.

Install the driver seat.

-	Make sure the IMS module connectors and related connectors are plugged in properly.

-	Check that IMS system operates normally.

IMS module Removal

1. Remove the negative (-) battery terminal. 2. Remove the front seat assembly. (Refer to Body - "Front Seat") ...

IMS Power Seat Control Circuit Diagram

...

See also:

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

Diagnosis With GDS
1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. ...

Tightening Torques
Item N.m kgf.m lb-ft Ignition coil installation bolt 9.8 ~ 11.8 1.0 ~ 1.2 7.2 ~ 8.7 Spark plug installation 14.7 ~ 24. ...

Categories

Copyright © www.ksmanual.com 2014-2026