Kia Sorento: Head Lamps Installation - Lighting System - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Head Lamps Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Lighting System / Head Lamps Installation

1.
Install the head lamp bulbs.
2.
Reassemble the head lamp bulb covers.
3.
Reassemble the head lamp assembly after connecting the lamp connector.
Head Lamps Removal
   Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turn ...

Head Lamps Replacement
Bulb (HID) 1. Turn the head lamp switch off. 2. Disconnect the power connector from the lamp. 3. Remove the ...

See also:

Inhibitor Switch
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals. ...

Overhead Console Lamp Installation
1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector. 2. Install the lens after tightening ...

Front Fog Lamps Inspection
1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multifunctio ...

Copyright © www.ksmanual.com 2014-2019