Kia Sorento: Hands Free Switch Inspection - Hands Free System - Body Electrical System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Hands Free Switch Inspection

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Inspection

1.
Check the handsfree remote control switch for resistance between No.2 and No.5 terminals in each switch position.

[Call + Hang Up]
Switch
Connector terminal
Resistance
(±5%)
Output voltage
(±0.16V)
Call
2 - 5 (Right)
30.2 kΩ ±5%
2.96V
Hang up
2 - 5 (Right)
8.2 kΩ ±5%
2.64V

Hands Free Switch Component Location
...

Hands Free Switch Removal
1. Remove the driver airbag module. (Refer to Restraint - "Airbag module") 2. Remove the steering wheel front cover (A) after ...

See also:

Front Wiper Motor Installation
1. Install the wiper motor. 2. Install the crank arm. Torque : 12.7-17.6Nm (1.3-1.8, kgf.m, 9.4-13.0 lbf. ...

Auto Defogging Sensor Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. ...

Knock Sensor (KS)
Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. Whe ...

Copyright © www.ksmanual.com 2014-2020