Kia Sorento: G-Sensor Calibration
| 1. |
Ignition "OFF", connect GDS.
|
| 2. |
Ignition "ON" & Engine "OFF" select vehicle name and ESP system.
|
| 3. |
Perform G-sensor calibration.
|
| 4. |
Perform the " G-Sensor Calibration " procedure with GDS.
|
| 5. |
Complete the “G-Sensor Calibration” procedure.
|
Yaw-rate and G Sensor Installation
ESC OFF Switch DescriptionIf the engine will not start
If engine doesn't turn over or turns over slowly
1.If your vehicle has an automatic transaxle, be sure the shift lever is in N
(Neutral) or P (Park) and the emergency brake is set.
2.Check the ...
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
...
Fluid Component Location
1. ATF Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...