Kia Sorento: Front Lower Arm Inspection - Front Suspension System - Suspension System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Front Lower Arm Inspection

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Suspension System / Front Suspension System / Front Lower Arm Inspection

1.
Check the bushing for wear and deterioration.
2.
Check the lower arm for bending or breakage.
3.
Check the lower arm for deformation.
4.
Check the all bolts and nuts.
Front Lower Arm Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Front Stabilizer Bar Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

See also:

Inspection
Lighting Switch Inspection 1. With the multi function switch in each position, make sure that continuity exists between the terminals below. If continuity is no ...

Teaching Procedures
1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedu ...

Oil hydraulic Motor(Actuator) Description
The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an oil pressure. The pressure engages a multiple disk clutch to transfer torque to the rear wheels. The torque to the rear wh ...

Copyright © www.ksmanual.com 2014-2019