Kia Sorento: Balance Shaft & Oil Pump Components - Lubrication System - Engine Mechanical System - Kia Sorento XM 2011-2021 Service ManualKia Sorento: Balance Shaft & Oil Pump Components

Second Generation XM (2011-2021) / Kia Sorento XM 2011-2021 Service Manual / Engine Mechanical System / Lubrication System / Balance Shaft & Oil Pump Components

1. Balance shaft & oil pump assembly
2. Balance shaft chain tensioner
3. Balance shaft chain
4. Balance shaft chain sprocket
5. Balance shaft chain guide
6. Balance shaft chain tensioner arm
7. Oil cooler
8. Oil filter

Oil Pan Installation
1. Install the oil pan. (1) Using a gasket scraper, remove all the old sealant material from the gasket surfaces. ...

Balance Shaft & Oil Pump Removal
BSM (Balance Shaft Module) Chain System 1. Remove the timing chain. (Refer to Timing System in this group) 2. Install a stopper pin (A) ...

See also:

PTG Spindle Installation
1. Connect the PTG spindle, bracket and connector. Tightening torque : 6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft) ...

Rear Assist Arm Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Special Service Tools
Tool (Number and Name) IIIustration Use 09546-26000 Strut spring compressor Compression of coil spring ...

Copyright © www.ksmanual.com 2014-2021