Kia Sorento: Catalytic Converter Removal - Exhaust Emission Control System - Emission Control System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Catalytic Converter Removal

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Emission Control System / Exhaust Emission Control System / Catalytic Converter Removal

1.
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
Catalytic Converter Description
The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx). [WCC] ...

Catalytic Converter Installation
1. Install in the reverse order of removal. ...

See also:

Normal maintenance schedule
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage an ...

Oil Pressure Switch Inspection
1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. ...

Fuel Pressure Control Valve
Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine ...

Copyright © www.ksmanual.com 2014-2019