Kia Sorento: Catalytic Converter Description - Exhaust Emission Control System - Emission Control System - Kia Sorento XM 2011-2021 Service ManualKia Sorento: Catalytic Converter Description

Second Generation XM (2011-2021) / Kia Sorento XM 2011-2021 Service Manual / Emission Control System / Exhaust Emission Control System / Catalytic Converter Description

The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx).
[WCC]

[UCC]

Description
Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, intake manifo ...

Catalytic Converter Removal
1. Remove the exhaust manifold. (Refer to Engine Mechanical System - "Exhaust Manifold") ...

See also:

Component Location
1. Overdrive Clutch (OD/C) 2. One way Clutch (OWC) 3. Low & Reverse Brake (LR/B) 4. Underdrive Brake (UD/B) 5. 26 Brake(26/B) 6. 35R Clutch (35R/C) 7. Damper Clu ...

Rear Upper Arm Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

TJ Joint Installation
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boot. 2. Using the alignment marks (D) made during disassembly as a ...

Copyright © www.ksmanual.com 2014-2021