Kia Sorento: Canister Inspection - Evaporative Emission Control System - Emission Control System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Canister Inspection

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Emission Control System / Evaporative Emission Control System / Canister Inspection

1.
Check for the following items visually.
A.
Cracks or leakage of the canister
B.
Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atmosphere
B: Canister ↔ Fuel Tank
C: Canister ↔ Intake Manifold
Canister Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...

Canister Installation
1. Install in the reverse order of removal. ...

See also:

Component Location
1. IPM (Intelligent intergrated Platfrom Moduel) 2. Ultrasonic sensor ...

Seat Heater Removal
1. Remove the driver / assist seat back heater (A) and cushion heater (B). (Refer to Body - "Front seat") 2. ...

Blower Resistor Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...

Copyright www.ksmanual.com 2014-2025