Kia Sorento: Battery Installation - Charging System - Engine Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Battery Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Electrical System / Charging System / Battery Installation

1.
Install in the reverse order of removal.

Battery (-)terminal installation nut:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Battery (+)terminal installation nut:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Battery mounting bracket installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 Ib-ft)
Battery tray installation bolts:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 Ib-ft)

  
Х
When installing the battery, fix the mounting bracket on the tray correctly.
Battery Removal
1. Disconnect the battery (-) terminal and (+) terminal (A). 2. Remove the battery mounting bracket (B) and the insulation pad and then rem ...

Battery Vehicle parasitic current inspection
1. Turn the all electric devices OFF, and then turn the ignition switch OFF. 2. Close all doors except the engine hood, and then lock all d ...

See also:

Tilting the sunroof
Before opening or closing the sunroof, open the roller blind (refer to the following page for instructions on how to use the roller blind). To open the sunroof, push the sunroof control lever upwa ...

Water pump Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage Х From the bleed hole of the water pump Visually check ...

Description
Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the a ...

Copyright © www.ksmanual.com 2014-2019