Kia Sorento: Air Ventilation Seat Inspection - Seat Electrical - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Air Ventilation Seat Inspection

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Inspection

1.
Attach the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3.
Check that the fan motor operates.

Pin
Description
1
12V
2
RPM control
3
GND

2.
If the fan motor fails to operate, replace it.
Air Ventilation Seat Installation
1. Install the blower fan. 2. Install the seat back and cushion. ...

Air Ventilation Seat Control Unit Component Location
...

See also:

Blind Spot Detection Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") ...

Ignition Coil Removal
1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

Interior A
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

Copyright © www.ksmanual.com 2014-2019