Kia Sorento: G-Sensor Calibration
| 1. |
Ignition "OFF", connect GDS.
|
| 2. |
Ignition "ON" & Engine "OFF" select vehicle name and ESP system.
|
| 3. |
Perform G-sensor calibration.
|
| 4. |
Perform the " G-Sensor Calibration " procedure with GDS.
|
| 5. |
Complete the “G-Sensor Calibration” procedure.
|
Yaw-rate and G Sensor Installation
ESC OFF Switch DescriptionCurtain air bag
Curtain air bags are located along both sides of the roof rails above the front
and rear doors.
They are designed to help protect occupants in certain side impacts and to help
prevent them from e ...
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
...
Fuel Tank Air Filter Installation
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped.
In this case, u ...