1. |
Install the holding clip (A, B) after fixing the parking brake
cable.
|
2. |
Install the parking brake pedal, and then install the parking
brake pedal mounting bolts (A) and nut (B).
|
3. |
Adjust the parking brake pedal stroke by turning the adjusting
nut (A).
|
4. |
Reconnect the parking brake switch connector.
|
5. |
Install the juncting box.
(Refer to Body Electrical System - "Relay Box(Passenger Compartment"))
|
6. |
Install the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
Tire Installation
1.
Apply tire soap or lubrication to the top and bottom tire beads.
2.
To fit the bottom bead, position the valve at the 5 o’clock pos ...
Emergency while driving
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you ha ...
Sub Frame Removel
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...