1. |
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
|
2. |
Remove the brake fluid from the master cylinder reservior with
a syringe.
|
3. |
Remove the wheel & tire.
|
4. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear
|
5. |
Remove the brake hose clip (A).
|
6. |
Disconnect the brake hose from the brake caliper by loosening
the bolt (A).
Front
Rear
|
Installation
1.
Install in the reverse order of removal.
•
...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Spe ...
Component Location
1. Rear glass defogger relay
2. Rear glass defogger switch
3. Rear glass defogger
...