Kia Sorento: Brake Line Components

Master Cylinder Installation

1. Installation is the reverse of removal. 2. After installation, bleed the brake system. (Refer to Brake system - "Brake system B ...

Brake Line Removal

1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder rese ...

See also:

Circuit Diagram
...

Front seat adjustment - power (if equipped)
The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so you can easily control the steerin ...

4WD ECU Circuit Diagram and Connector
4WD ECU Connector Pin Function 1 MOTOR A 2 MOTOR B 3 LOCK MODE SWITCH (Input) 4 - ...