Kia Sorento: Curtain Airbag (CAB) Module Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module Removal
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the roof trim. (Refer to the Body group- Interior)
|
| 3. |
Disconnect the curtain airbag harness connector.
|
| 4. |
After loosening the mounting bolts (10EA) remove the curtain airbag.
|
Curtain Airbag (CAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
Blind Spot Detection Unit Installation
1.
Install the BSD units to the rear bumper.
2.
Install the rear bumper.
3.
Connect the negative (-) battery te ...
Auto Head lamp leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Height sensor signal change
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026