1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable from battery and wait for
at least thirty seconds before beginning work.
|
3. |
Place a passenger airbag on the crash pad and tighten the passenger
airbag mounting bolts.
|
4. |
Install the crash pad.
(Refer to Body - "Main crash pad assembly")
|
5. |
Tighten the passenger airbag mounting bolts.
|
6. |
Connect the passenger airbag harness connector to the SRS main
harness connector.
|
7. |
Reinstall the glove box housing.
(Refer to Body - "Glove box housing")
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the passenger airbag (PAB), confirm proper system
operation:
|
Description of ESC
Electronic Stability Control (ESC) recognizes critical driving conditions,
such as panic reactions in dangerous situations, and stabilizes the vehicle
by wheel-individual braking and engine c ...
AC Inverter Switch Removal
•
Pry the trim off using a plastic trim tool and apply protective
tape around the rela ...
Component Location
1. Windshield wiper arm & blade
2. Wiper & washer switch
3. Windshield washer hose
4. Windshield wiper motor & linkage
5. Washer motor
6. Washer reservoir
...