Kia Sorento: Heated Steering wheel Inpection

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Steering System / Steering wheel / Heated Steering wheel Inpection

1.

Measure a resistance of NTC and Heated pad.

A.	NTC resistance(Black / Yellow, Black) - 10.0 kΩ Â± 10% (25Â°C)

B.	Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω Â± 10%

2.

Measure a temperature.

A.	The temperature of wheel surface grip must rise from -20Â°C to 20Â°C within 6 minute

B.	The temperature of wheel surface grip must keep 38Â°C Â± 4Â°C after 25 minute

C.	At that time switch on, all measure point (1~8)

Heated Steering wheel System Circuit Diagram

Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C ...

Flex Steering Components Location

1. Flex steering switch ...

See also:

Components Location
Supplemental Restraint System Control Module (SRSCM) Driver Airbag (DAB) / Passenger Airbag (PAB) Side Airbag (SAB) Curtain Airbag (CA ...

Power Tailgate Latch Inspection
Power Tailgate Inspection With GDS 1. Check the power Tailgate module input/output value by using the GDS. If the operation of power Tailgate module is abnormal, replac ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Categories

Copyright © www.ksmanual.com 2014-2026