Kia Sorento: Rear Hub - Carrier Inspection

Rear Hub - Carrier Disassembly

1. Remove the hub assembly mounting bolts (A-4ea) from the rear axle carrier (B). Tightening torque: 78.5 ~ 88.3N.m (8.0 ~ 9.0 ...

Rear Driveshaft Assembly

...

See also:

Installation
1. Check that the shift lever is placed in the "N" position 2. Install the inhibitor switch (A). ...

Specifications
Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23) Current value(mA) ...

IPM Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...