Kia Sorento: Front Hub / Knuckle / Tone Wheel Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel Inspection
| 1. |
Check the hub for cracks and the splines for wear.
|
| 2. |
Check the brake disc for scoring and damage.
|
| 3. |
Check the knuckle for cracks
|
| 4. |
Check the bearing for cracks or damage.
|
Front Hub / Knuckle / Tone Wheel Disassembly
1.
Remove the brake disc (B) from the knuckle assembly (A).
Tightening torque:
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft)
...
See also:
Telemetics Unit (TMU) Component
Connector Pin Specification
No.
Pin Name
Type
From
To
Description (Wiring Spec.)
1
GND
DC Ground
TMU
Battery
...
Using Voice Recognition
Starting Voice Recognition
Shortly press the key on the steering
wheel. Say a command
If prompt feedback is in [ON], then the system will say “Please say a command
after the beep (BEEP)”
...
Curtain Airbag (CAB) Module Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
2.
Remove the roof trim. (Refer to the ...
Copyright © www.ksmanual.com 2014-2024