Kia Sorento: Front Hub / Knuckle / Tone Wheel Disassembly - Front Axle Assembly - Driveshaft and axle - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Front Hub / Knuckle / Tone Wheel Disassembly

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel Disassembly

1.
Remove the brake disc (B) from the knuckle assembly (A).

Tightening torque:
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft)

2.
Remove the hub assembly mounting bolts (B) from the knuckle (A).

Tightening torque:
78.4 ~ 98.0N.m (8.0 ~ 10.0kgf.m, 57.8 ~ 72.3lb-ft)

3.
Remove the hub assembly (C) and the dust cover (B) from the knuckle (A).
  
Do not disassemble the hub assembly.

4.
Reassembly in the reverse order of disassembly.
Front Hub / Knuckle / Tone Wheel Removal and Installation
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Front Hub / Knuckle / Tone Wheel Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

See also:

Front Washer Motor Inspection
Front and Rear Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. &nb ...

Engine Control Module (ECM) Adjustment
• After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed. 1) [If installing a used ECM] ...

Mode Control Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the driver's side crash pad side cover. ...

Copyright © www.ksmanual.com 2014-2020