Kia Sorento: Shift Cable Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Shift Cable Installation

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Installation

1.
Install in the reverse order of removal.
  
Set shift lever and inhibitor switch manual control lever to "N" position.
Shift Cable Removal
1. Remove the floor console. (Refer to Body - "Floor console") 2. Remove the air duct. 3. Dis ...

Shift Cable Adjustment
Adjusting method for T/M control cable 1. Set room side shift lever and T/M side manual control lever to "N" position. 2. ...

See also:

Component Location
1. Overdrive Clutch (OD/C) 2. One way Clutch (OWC) 3. Low & Reverse Brake (LR/B) 4. Underdrive Brake (UD/B) 5. 26 Brake(26/B) 6. 35R Clutch (35R/C) 7. Damper Clu ...

Power Tailgate Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the rear left luggage side trim. (Refer to Body - "Interior Trim") ...

Starter Cleaning
1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...

Copyright www.ksmanual.com 2014-2025