Kia Sorento: Shift Lever Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Shift Lever Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Installation

1.
Install in the reverse order of removal.
  
Set shift lever and inhibitor switch manual control lever to "N" position.
Shift Lever Removal
1. Remove the floor console. (Refer to Body - "Floor console") 2. Remove the air duct. 3. Dis ...

Shift Cable Components
1. Shift lever mounting bolt 2. Shift lever assembly 3. Shift cable assembly 4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS)
35R Clutch control solenoid valve(35R/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 35R Clutch. ...

Timing Chain Inspection
Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm, Timing Chain 1. Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear, cracks or damage. Replace ...

Thermostat Removal and Installation
   Removal of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the ther ...

Copyright www.ksmanual.com 2014-2026