Kia Sorento: Output Speed Sensor Specifications
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Specifications
▷ Type: Hall effect sensor
| Operation condition (°C)°F |
((-)40 ~ 150)) -40 ~ 302 |
|
| Air gap(mm)in. |
(1.45~1.9) 0.0571~0.0748 |
|
| Output voltage (V) |
High |
1.18 ~ 1.68 |
| Low |
0.59 ~ 0.84 |
|
Output Speed Sensor Description
The output speed sensor (A) is a vital unit that measures the rate of
rotation of the transaxle's turbine shaft and output shaft, and delivers the
readings to the Transaxle Control Module ...
See also:
BJ Boot Removal and Installation
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refe ...
Smart key unit Installation
Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting bolt and nut, and then connect
the connector.
...
Rear Hub - Carrier Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the rear axle carrier for cracks.
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026