Kia Sorento: ATF Warmer Component

ATF Warmer Component Location

1. ATF Warmar 2. Bypass valve 3. ATF hose & pipe 4. Coolant hose & pipe ...

ATF Warmer Removal

1. Drain the coolant. (Refer to Engine Mechanical System - "Coolant") 2. Remove the air cleaner assembly and air duct. ...

See also:

Rear Driveshaft Components
1. Tone wheel 2. BJ joint 3. BJ boot 4. BJ boot big part band 5. BJ boot small part band 6. Shaft 7. TJ boot small part band 8. TJ boot big part band 9. TJ boot ...

PTG Spindle Installation
1. Connect the PTG spindle, bracket and connector. Tightening torque : 6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft) ...

Engine coolant
The high-pressure cooling system has a reservoir filled with year round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a ...